CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Autodesk Simulation CFD (http://www.cfd-online.com/Forums/autodesk-simulation-cfd/)
-   -   Heat Exchangers (http://www.cfd-online.com/Forums/autodesk-simulation-cfd/105337-heat-exchangers.html)

Mithrandir July 27, 2012 21:14

Heat Exchangers
 
Anyone with experiance CFD'ing the flow thru distributed resistances?
My simulations get sketchy and diverge?

ryan.arnaudin July 30, 2012 19:22

Heat exchanger or distributed resistance?

If a resistance, is it sufficiently meshed? Try to make sure you have at least a couple elements spanning the thickness of the volume. "Use uniform" can be helpful in this kind of situation.

Mithrandir July 30, 2012 19:34

looking for experiance with comments on the Head Capacity curve, values, typical Radiator characteristics... what advection scheme?

that sorta stuff...

External flow with an inlet, duct, Hx, exhaust duct.


All times are GMT -4. The time now is 12:10.