Can't generate a mesh
2 Attachment(s)
Hello,
After the first installation of Autodesk Simulation CFD 2013 the program can't generate a mesh even on a simple geometry. The failure message says "the Solver has exited unexpectedly" (please see the attachhed pictures). Has anybody experienced the same problem? Thank you for the help in advance. |
There are many things that could cause that:
improper Material conditions Poor boundary conditions Poor Mesh sizing License issues...... |
Thanks for the help!
I have also found the detail description of the possible failure reasons. https://knowledge.autodesk.com/searc...xpectedly.html |
All times are GMT -4. The time now is 00:40. |