Is it suitable for building ventilation system simulation?

llrr · January 24, 2012, 08:49

Hi everyone, I would like to know if Autodesk Simulation CFD 2012 is suitable for simulating airflow in a building with ventilation system? I see that the software use finite element method to discretize the partial differential equations instead of finite volume control method. How can I evaluate the conservation of mass, momentum and energy in this software? How about funtion of the mesher in this software? Thank you very much for your time.

Best,
Li

ryan.arnaudin · February 24, 2012, 10:36

This is definitely possible and there are a lot of successful customers in this space.

Check out these pages from the CFdesign website for some specifics (as of yet I know no equivalent link on the Autodesk domain):

http://www.cfdesign.com/Will-CFdesig...gineering.aspx
http://www.cfdesign.com/Will-CFdesig...blem/HVAC.aspx

fahrurrazi · March 1, 2012, 11:37

I am interested in these topic. I am now BIM tools user, and use Revit as my platform. I would like to do some sample on HVAC and other related simulation of Building industry regarding CFD. Is there any sample that I could try?

ryan.arnaudin · March 1, 2012, 11:53

I found the following Quick Start Guide for Simulation CFD (CFdesign) and Revit by Googling "CFD for Revit". There are some sample models attached to it:

http://www.cfdesign.com/Support/Cust...0000000X1FDAA0

January 24, 2012, 08:49	Is it suitable for building ventilation system simulation?	#1
llrr Member Li Join Date: Mar 2009 Posts: 54 Rep Power: 17	Hi everyone, I would like to know if Autodesk Simulation CFD 2012 is suitable for simulating airflow in a building with ventilation system? I see that the software use finite element method to discretize the partial differential equations instead of finite volume control method. How can I evaluate the conservation of mass, momentum and energy in this software? How about funtion of the mesher in this software? Thank you very much for your time. Best, Li

February 24, 2012, 10:36		#2
ryan.arnaudin New Member Ryan Join Date: Dec 2011 Posts: 10 Rep Power: 14	This is definitely possible and there are a lot of successful customers in this space. Check out these pages from the CFdesign website for some specifics (as of yet I know no equivalent link on the Autodesk domain): http://www.cfdesign.com/Will-CFdesig...gineering.aspx http://www.cfdesign.com/Will-CFdesig...blem/HVAC.aspx fahrurrazi likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 05:21
OF suitable for dynamic building simulation?	pizzaice	OpenFOAM Running, Solving & CFD	0	November 27, 2009 08:02
Adventure of fisrst openfoam installation on Ubuntu 710	jussi	OpenFOAM Installation	0	April 24, 2008 14:25
which model is suitable for natural ventilation?	HVAC	FLUENT	5	December 27, 2005 20:29
The boundary condition of ventilation fans	Luo Shengping	Main CFD Forum	3	February 28, 2000 02:22

March 1, 2012, 11:37		#3
fahrurrazi New Member Muhammad Fahrurrazi Join Date: Mar 2012 Posts: 2 Rep Power: 0	I am interested in these topic. I am now BIM tools user, and use Revit as my platform. I would like to do some sample on HVAC and other related simulation of Building industry regarding CFD. Is there any sample that I could try?

March 1, 2012, 11:53		#4
ryan.arnaudin New Member Ryan Join Date: Dec 2011 Posts: 10 Rep Power: 14	I found the following Quick Start Guide for Simulation CFD (CFdesign) and Revit by Googling "CFD for Revit". There are some sample models attached to it: http://www.cfdesign.com/Support/Cust...0000000X1FDAA0