Changing units in AVL Fire

zaer · May 17, 2012, 05:26

Hi,

I have a problem with AVL Fire. I don’t know how can I change units in this software.
I have made a part in GAMBIT and then meshed it. When I import it into AVL Fire, its dimensions are in m.
I want to change the dimensions to mm, but I don't know how?

Thank you,
Som

rezahemmat1985 · July 17, 2012, 02:45

hi dear,
I am using AVL Fire, I can it is not possible to scale the meshes in Fire. I had got this problem before. Does your problem resolved?If yes tell me how you scale it in Fire. thanks in advance. if possible be in contact with me via email : reza_hemmatdj@yahoo.com I like to have contact with other Fire users and share experiences.

avlcfd · July 18, 2012, 00:27

Hi,

in FIRE all units are SI Standard units. If you import a grid (or other data) the SW assumes that SI Units have been applied when writing the data.

2 options:
a) you write out the Gambit grid again using [m] instead of [mm]
b) use MESH TOOLS > MODIFY > BLOW (0.001) to scale the grid from [m] to [mm]

avlcfd

May 17, 2012, 05:26	Changing units in AVL Fire	#1
zaer New Member Som Zax Join Date: Mar 2012 Posts: 3 Rep Power: 14	Hi, I have a problem with AVL Fire. I don’t know how can I change units* in this software.* I have made a part in GAMBIT and then meshed it. When I import it into AVL Fire, its dimensions are in m. I want to change the dimensions to mm, but I don't know how? Thank you, Som

July 17, 2012, 02:45	changing the units	#2
rezahemmat1985 New Member reza hemmat Join Date: Jan 2012 Posts: 24 Rep Power: 14	hi dear, I am using AVL Fire, I can it is not possible to scale the meshes in Fire. I had got this problem before. Does your problem resolved?If yes tell me how you scale it in Fire. thanks in advance. if possible be in contact with me via email : reza_hemmatdj@yahoo.com I like to have contact with other Fire users and share experiences.

July 18, 2012, 00:27	Changing units	#3
avlcfd New Member Maik SUFFA Join Date: Jul 2012 Posts: 7 Rep Power: 13	Hi, in FIRE all units are SI Standard units. If you import a grid (or other data) the SW assumes that SI Units have been applied when writing the data. 2 options: a) you write out the Gambit grid again using [m] instead of [mm] b) use MESH TOOLS > MODIFY > BLOW (0.001) to scale the grid from [m] to [mm] avlcfd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AVL Fire Error CfdCFDwm.exe, error message	Farhad_hgd2000	FLOW-3D	1	October 23, 2010 15:10
AVL Fire transonic simulation	Ainil	Main CFD Forum	1	August 24, 2010 15:53
AVL fire Exhaust manifold Simulation	mohsenfjs	Main CFD Forum	0	May 15, 2010 11:51
Combustion model for CAI/HCCI in AVL FIRE	stoodent	Main CFD Forum	0	July 19, 2009 18:37
FIRE 7.2 AVL	Simone Lazzara	Main CFD Forum	0	July 11, 2002 05:30