|
[Sponsors] |
July 24, 2012, 05:49 |
transfer matrxi
|
#1 |
New Member
reza hemmat
Join Date: Jan 2012
Posts: 24
Rep Power: 14 |
hi to all,
how can I find the transfer matrix in AVL Fire in a FEM to CFD mapping?thanks alot |
|
July 25, 2012, 05:11 |
|
#2 |
New Member
Join Date: Jul 2012
Posts: 7
Rep Power: 13 |
Maybe you have a look into the examples. There is the example 914 and 918.
For more details how the matrix ix defined you may have a look into the manual of the CFD/FE Interface. You can find an example for this transfer matrix in the FIRE installation. <PATH>/FIRE/v2011.1/modules/fem_interface/*.mtx Maybe you try the mapping first with the FIRE example and then with you real case. br |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problems after decomposing for running | alessio.nz | OpenFOAM | 7 | March 5, 2021 05:49 |
mass transfer in ANSYS | thipps | ANSYS | 1 | August 29, 2013 12:05 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 04:32 |
Convective / Conductive Heat Transfer in Hypersonic flows | enigma | Main CFD Forum | 2 | November 1, 2009 23:53 |
Convective Heat Transfer - Heat Exchanger | Mark | CFX | 6 | November 15, 2004 16:55 |