CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   AVL FIRE (http://www.cfd-online.com/Forums/avl-fire/)
-   -   HTC variation output in quenching process (http://www.cfd-online.com/Forums/avl-fire/106340-htc-variation-output-quenching-process.html)

mechanical August 26, 2012 09:58

HTC variation output in quenching process
 
I want to reach to the variation of heat transfer coefficient that occure during quenching process, but in 3D results output in quenching simulation we have only " convective heat transfer coefficient " contoure, so how can I reach to this? Does it need subroutine? Does anyone have any suggestion about it?

regards

avlcfd September 14, 2012 07:47

What do you mean by "variation of heat transfer coefficient that occure during quenching process"? You talk about heat transfer over time?

mechanical September 14, 2012 11:21

1 Attachment(s)
thanks dear

you know in quenching process we have 3 types of heat transfer including film boiling, nucleate boiling and at last convection, I mean after simulation finished, how can I reach to the results of heat transfer coefficient during this process including these all regimes, I selected a defined cell and then I import this subroutine that I attached for you to get heat transfer(Q), then I used this formula to get HTC, " HTC = Q/(Ts-Tfluid), so do you think is it right?

do you have any suggestion?


All times are GMT -4. The time now is 01:18.