Simulation of syngas-diesel dual fuel combustion with AVL FIRE
Hi and very good day every body
I would like to use AVL Fire as the tool to simulate the syngas-diesel dual fuel combustion operation, but I have not used AVL fire software before and I don't have any background about it. I have very limited time to do so, therefore I would be very grateful if you could help me by providing the best procedures to do so within very short time starting from creating the geometry.
You can define the syngas equivalence ratio in the Initial Condition and diesel fuel in Spray Module. The Combustion model could be selected as Eddy Break Up or ECFM combined with Diesel Ignited Gas Engine ignition model. Hopefully it may help
|All times are GMT -4. The time now is 12:35.|