CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > AVL FIRE

Chamber model assembler

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 15, 2013, 11:39
Default Chamber model assembler
  #1
New Member
 
hamed
Join Date: Feb 2013
Posts: 23
Rep Power: 4
hamedhamed is on a distinguished road
Hi everybody

I have generated a dynamic mesh of a chamber and Intake ports using Chamber Modeler and Model Assembler in AVL FIRE(v2011). but simulation results show that it may be no connection between Chamber and intake ports. you can see the related cut planes:

1-relative pressure at 370.1 deg (first solved timestep ,started at 370 deg)
in this picture the connection can be seen.
Attachment 20777


2-relative pressure at 400 deg
but in this picture chamber pressure and ports pressure are splited
Attachment 20778


3-streamlines at 435.5 deg
Attachment 20779

how can i fix it?

best regards
hamedhamed is offline   Reply With Quote

Reply

Tags
avl fire, model assebler

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Chamber model assembler hamedhamed AVL FIRE 0 April 15, 2013 11:33
Reynolds Stress model in CFX vs Fluent Tim CFX 1 October 7, 2009 06:19
2 stage axial turbine model convergence issues sherifkadry CFX 2 September 7, 2009 20:51
multi fluid mixture model issue rystokes CFX 3 August 9, 2009 19:13
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27


All times are GMT -4. The time now is 03:50.