dual fuel(RCCI engine) -- CFD Online Discussion Forums

September 19, 2013, 01:32	dual fuel(RCCI engine)	#1
amin_u50 Senior Member amin u3fi Join Date: Feb 2013 Posts: 137 Rep Power: 13	hi dears... I am simulating dual fuel DME/CH4 with AVL FIRE 2011. I couple Chemical kinetics with CFD for this simulation and Spray mode is active in this simulation. the start of injection is 15CA BTDC. when my simulation arrive in start of injection the calculation doesn't progress and the last message in .fla file is: %fire-W-cyveloc, U velocity is limited with 2000 m/s from current velocity=24658.8 m/s for Droplet No.=1 For Spray momentum coupling Momentum Source = 1 is recommended ! Momentumratio (Spray/Gasphase)=0.00000 %fire-W-cyveloc, W velocity is limited with 2000 m/s from current velocity=-5386.16 m/s for Droplet No.=1 For Spray momentum coupling Momentum Source = 1 is recommended ! Momentumratio (Spray/Gasphase)=0.00000 %fire-W-cyveloc, V velocity is limited with 2000 m/s from current velocity=-2.083323E+07 m/s for Droplet No.=36 For Spray momentum coupling Momentum Source = 1 is recommended ! Momentumratio (Spray/Gasphase)=-1.4889 I need your help for solve this problem... amin_u50 best regards Tarig277 likes this. Last edited by amin_u50; September 19, 2013 at 10:16.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
simulation Dual Fuel engine with AVL FIRE	Hoursfer	AVL FIRE	18	October 9, 2023 15:44
Simulation of syngas-diesel dual fuel combustion with AVL FIRE	bahaaddein	AVL FIRE	1	January 28, 2013 06:19
CFD of combustion process of Homogeneous Charge Compression Engine (HCCI)	kelvinlim	Main CFD Forum	2	January 26, 2012 22:19
recover solution from dual grid	jamesproctor	Main CFD Forum	0	July 30, 2010 15:31
Combustion modelling of dual fuel engine ??	ashishashish_5	FLUENT	1	January 18, 2010 20:42

All times are GMT -4. The time now is 12:04.