CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > AVL FIRE

batch job

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 22, 2013, 18:30
Default batch job
  #1
Member
 
shahrbanoo
Join Date: Mar 2013
Posts: 58
Rep Power: 4
shahrbanoo is on a distinguished road
Hi
I,ve started meshing with Fame engine pluse with single processor. but it takes a long time to be finished. how can I stop meshing?(of course I did it, but the crank angles that where had been meshing, were not meshed after again starting a new mesh) and start a new one with batch job?
I did all of this but batch job doesn' work and it's meshing with a single processor.
shahrbanoo is offline   Reply With Quote

Old   November 23, 2013, 07:04
Default
  #2
Member
 
amin u3fi
Join Date: Feb 2013
Posts: 58
Rep Power: 4
amin_u50 is on a distinguished road
Hi...
Why? If you stop FEP your system finishes the meshing process. You can delete a file ;that I don not know its name exactly; in the mesh folder and start a new meshing. moreover, I think V.2008 is not able to use 2 cores at the same time but V.2011 can.
best regards SH.SH
amin -u50
amin_u50 is offline   Reply With Quote

Old   November 23, 2013, 14:37
Default
  #3
Member
 
shahrbanoo
Join Date: Mar 2013
Posts: 58
Rep Power: 4
shahrbanoo is on a distinguished road
Hi
thanks dear amin_u50 for u'r answer
so I have to install Fire 2011 in near future!!
I have another problem now:
In the meshing process, I stopped meshing for changing the mesh setting and convert single processor to batch job, but I didn't succeed and the interval(i.g 475-485) had not been meshed and the intervals after that had been meshed. now I have 10CA that is not meshed! what should I do for meshing it?
shahrbanoo is offline   Reply With Quote

Old   November 24, 2013, 08:18
Default
  #4
Member
 
shahrbanoo
Join Date: Mar 2013
Posts: 58
Rep Power: 4
shahrbanoo is on a distinguished road
I found how to do it!
so simple!!
shahrbanoo is offline   Reply With Quote

Old   November 24, 2013, 12:02
Default
  #5
Member
 
amin u3fi
Join Date: Feb 2013
Posts: 58
Rep Power: 4
amin_u50 is on a distinguished road
congratulation
amin_u50 is offline   Reply With Quote

Old   December 15, 2013, 13:08
Default
  #6
New Member
 
mehdi
Join Date: Dec 2013
Posts: 2
Rep Power: 0
mehi is on a distinguished road
hi guys!
im recently working by fame engin plus.any body knows in fame engin plus at input surface section what is the range of cranck angle(valid from... to... cranck angle)?
mehi is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stopping a Fluent batch job AND saving the data! Possible? Volker Pawlik FLUENT 7 May 22, 2014 22:30
FLUENT Batch job Saravanan FLUENT 11 May 14, 2014 16:47
[Question]About batch job fluboy FLUENT 2 August 12, 2009 11:10
How to specify the iterations of a batch job Consol Main CFD Forum 0 October 18, 2008 23:42
Running Job in Batch mode (EFD) Nick Sessions FloEFD, FloWorks & FloTHERM 0 April 16, 2008 16:44


All times are GMT -4. The time now is 22:04.