CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > AVL FIRE

Fire wm

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 27, 2014, 12:54
Default Fire wm
  #1
New Member
 
VENKATESH T LAMANI
Join Date: Mar 2009
Location: BANGALORE, KARNATAKA, INDIA
Posts: 8
Rep Power: 8
openfoam is on a distinguished road
Dear FIRE users.

I am solving single cylinder four stroke, diesel engine with below mentioned conditions ,I generated the mesh file in ESE, and imported .fpr file in WM.All the boundary conditions are applied with the help of user manual. Soon I give it for calculation it starts and in very less time dialogue box appears saying calculation is finished.

Number of injection holes: 6

Bore X stroke: 13.719 X 16.51 cm

compression ratio :15.1

connecting rod :26.162


IVC: 573 THAT IS -147 ATDC

EVO :854

FUEL INJ./CYCLE :0.00016550

INJ DURATION :21.6 DEG

MAX NUMBER OF ITERATION/ CRANK ANGLE :20 DEG

MIN NUMBER OF ITERATION/ CRANK ANGLE :10 DEG

Thank u for ur help
openfoam is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Car park ventilation and impulse fans guillaume Phoenics 8 February 8, 2013 02:29
Wildland surface fire representation in OpenFOAM Bufacchi OpenFOAM 0 June 4, 2010 12:07
Fire simulation in Steckler room Per Burström CFX 2 March 27, 2007 19:01
Combustion: pool fire problem Jonathan CFX 2 October 27, 2003 12:49
Temperature errors on fire simulation? raymond CD-adapco 0 January 10, 2002 21:32


All times are GMT -4. The time now is 13:09.