CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > AVL FIRE

How to mesh a combustion chamber with injection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 9, 2014, 11:03
Default How to mesh a combustion chamber with injection
  #1
Member
 
shahrbanoo
Join Date: Mar 2013
Posts: 58
Rep Power: 4
shahrbanoo is on a distinguished road
Hi dears...

I want to model SIDI engine. that it's geometry is not symmetric, so I can't mesh 2d first and then convert it to 3d mesh.So I made the 3d geometry in Catia and I want to mesh it in a way with smaller grids near injector place. how can I do that? Is that possible with using Fame tet, Topology and Fame DTM?

Tanx...
shahrbanoo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 23 August 6, 2014 03:50
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
No layers in a small gap bobburnquist OpenFOAM Native Meshers: snappyHexMesh and Others 2 November 25, 2012 09:54
[GAMBIT] Combustion Chamber with Quadrilateral Elements amita ANSYS Meshing & Geometry 0 May 5, 2009 23:14
Cylindrical combustion chamber expanding mesh Neil FLUENT 0 October 19, 2006 08:34


All times are GMT -4. The time now is 01:56.