dual fuel simulation

hamedhamed · July 11, 2015, 01:44

Hi everybody,

I want to simulate a dual fuel combustion but I cant prepare the mixture.
to explain the matter more clearly, I want to have a constant volume vessel filled by Methane, then inject a spray of diesel. after arranging all parameters, unfortunately Methane is emerging from nozzle not Diesel.

All your kind efforts are highly appreciated in advance.

Regards,
hamed

cfdvenkatesh · July 15, 2015, 14:23

I could help you, if you can send me your ssf file. Hope you are using Spray Module for Diesel Injection? Are you using diesel ignited gas engine or General Gas Phase Reaction ( Chemical kinetics). If you are using Diesel Ignited Gas Engine model, then Diesel would be evaporated into Methane and auto ignition calculations are done only on cells having Equivalence Ratio above user specified value /average. I assume in those rich zone properties of Diesel are being used for auto ignition calculations. If you need additional details, please contact me at mailforvenkat@yahoo.com

July 11, 2015, 01:44	dual fuel simulation	#1
hamedhamed New Member hamed Join Date: Feb 2013 Posts: 24 Rep Power: 13	Hi everybody, I want to simulate a dual fuel combustion but I cant prepare the mixture. to explain the matter more clearly, I want to have a constant volume vessel filled by Methane, then inject a spray of diesel. after arranging all parameters, unfortunately Methane is emerging from nozzle not Diesel. All your kind efforts are highly appreciated in advance. Regards, hamed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem in initializing transient simulation with a finer mesh	sidd	CFX	8	April 29, 2016 02:25
Simulation of high pressure diesel injector - all phases compressible with cavitation	fivos	CFX	4	July 30, 2015 06:48
Huge file sizes when Running VOF simulation	aarratia	FLUENT	0	May 8, 2014 12:27
Fuel Injection Simulation	saiprudhvinagireddy	FLUENT	0	May 3, 2014 10:56
Numerical simulation of gaseous fuel injection in KIVA	ruoyu1203	Main CFD Forum	0	March 15, 2013 21:21

July 15, 2015, 14:23		#2
cfdvenkatesh New Member Venkatesh V Join Date: Sep 2009 Posts: 24 Rep Power: 16	I could help you, if you can send me your ssf file. Hope you are using Spray Module for Diesel Injection? Are you using diesel ignited gas engine or General Gas Phase Reaction ( Chemical kinetics). If you are using Diesel Ignited Gas Engine model, then Diesel would be evaporated into Methane and auto ignition calculations are done only on cells having Equivalence Ratio above user specified value /average. I assume in those rich zone properties of Diesel are being used for auto ignition calculations. If you need additional details, please contact me at mailforvenkat@yahoo.com