CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums

Entries for July 27, 2014

Register Blogs Members List Search Today's Posts Mark Forums Read

Old

Step-by-step SU2 clean parallel Installation (Part 1/3)

Posted July 27, 2014 at 21:31 by pdp.aero
Updated July 31, 2014 at 19:24 by pdp.aero

Long story short, my system has been infected by a malicious. Couldn't remove it, so decided to format the disk and start over fresh. After, I decided to open a blog and share everything that I did for installing the SU2 suite step by step. What you are going to read is step-by-step instruction for installing the SU2 suite after having a clean OS installation. Therefore, there is no precompiled library, packages or third-party software.

All the instruction provided here is based...
Attached Thumbnails
Click image for larger version

Name:	brokenfanvent.jpg
Views:	75
Size:	91.0 KB
ID:	238  
Member
Posted in Uncategorized
Views 2024 Comments 0 pdp.aero is offline Edit Tags
Old

Step-by-step SU2 clean parallel Installation (Part 3/3)

Posted July 27, 2014 at 21:15 by pdp.aero
Updated January 17, 2015 at 01:10 by pdp.aero

For the past

In this section, we are going to install the SU2 2.0.2, pretty old version comparing to current version 3.2.0, and then SU2 2.0.10, after we will finally install the SU2 3.0.0. Again, download the tar file, put the source in a right place, and unpack it. Before building these versions we will need the stands-alone metis.

Metis 4.0.3

Download the tar file from here, put it in your SU2 2.0.2 trunk, then unpack the tar file and direct there....
Member
Posted in Uncategorized
Views 1254 Comments 0 pdp.aero is offline Edit Tags
Old

Step-by-step SU2 clean parallel Installation (Part 2/3)

Posted July 27, 2014 at 21:12 by pdp.aero
Updated January 17, 2015 at 01:13 by pdp.aero

Step 4: Scipy 0.11.0

First, we need to be sure about the f2py, which is a requirement, so enter the following commands, and make sure that you have it. In the previous step, we checked the numpy that has been added to the python 2.6.6 site package, so now we can go to build the scipy. To this end, download the source from here, unpack it in an appropriate directory, and simply follow the provided commands after directing there.

Code:
python setup.py build
sudo python
...
Member
Posted in Uncategorized
Views 1277 Comments 0 pdp.aero is offline Edit Tags
Old

Influence of mesh size, orientation and type on numerical schemes

Posted July 27, 2014 at 11:13 by Tobi
Updated July 28, 2014 at 04:46 by Tobi

Dear Community,

I am happy and glad to tell you that I finished to analyze all my cases in the investigation of the "Influence of mesh size, orientation and type on numerical schemes in a convective flow field".

Information

  • Investigate into numerical schemes to convective flow field
  • Influence of schemes on mesh size
  • Influence of schemes on mesh type (structured / unstructured)
  • Influence of schemes on mesh/flow orientation (45degree / 0 degree)
...
Tobi's Avatar
Senior Member
Views 470 Comments 0 Tobi is online now Edit Tags

All times are GMT -4. The time now is 14:58.