CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums

diamondx

Register Blogs Members List Search Today's Posts Mark Forums Read

Old

extract edge of the geometry as input of the skethch

Posted November 20, 2012 at 12:30 by diamondx

Right click on the plane where you want the sketch (cant be any of the three original ones, make a new plane), then choose Insert > Sketch Projection
diamondx's Avatar
Super Moderator
Posted in Uncategorized
Views 297 Comments 0 diamondx is offline Edit Tags
Old

2d meshing in ansys meshing

Posted November 2, 2012 at 09:08 by diamondx

I remember in the past I was using the import features from solidworks with the plug-in features mentioned and also via various file formats such as IGES or Parasolid.

In order to avoid any errors with geometry and meshing I have decided to move to DesignModeller for most of my simple geometries. It saves so much time especially when undertaking a iterative design or optimisation study. Unless the geometry is complicated or represents some assembly which is used elsewhere, by members...
diamondx's Avatar
Super Moderator
Posted in Uncategorized
Views 481 Comments 1 diamondx is offline Edit Tags
Old

nice trick from psymn

Posted October 29, 2012 at 13:53 by diamondx

nice trick from simon:
Quote:
Originally Posted by PSYMN View Post
Another good "trick" is to create quad elements in the right pattern...

You can create elements manually under the Edit Mesh tab.

Just lay them out to form the shape you want, including that little Y block region.

Then Extrude them up into Hexa blocks.

Then File => Blocking => Load from Unstructured mesh will turn those into a blocking file.

Then associate that blocking with
...
diamondx's Avatar
Super Moderator
Posted in Uncategorized
Views 505 Comments 0 diamondx is offline Edit Tags

All times are GMT -4. The time now is 22:57.