Comparison CFD mesh software GAMBIT with ANSYS MESH
Posted May 30, 2012 at 23:35 by Guava Wang
Some experiences using GAMBIT and ANSYS MESH shares with you guys.In the last five years, I use GAMBIT for meshing model. After ANSYS being merged FLUENT into workbench, GAMBIT isn't included in this product, and it is substituted for ANSYS MESH.
The main differences are as below.
1. model process. GAMBIT can include interior zone by spliting body with surface, and that can also be set as wall.
2.mesh process. ansys mesh can automatically meshed the models with different types by judging the shape of the geometry, such as regular solid with HEX mesh method, and ect.
The main differences are as below.
1. model process. GAMBIT can include interior zone by spliting body with surface, and that can also be set as wall.
2.mesh process. ansys mesh can automatically meshed the models with different types by judging the shape of the geometry, such as regular solid with HEX mesh method, and ect.
Total Comments 1
Comments
-
Hi
In gambit a used split to to match the mesh density at the interface between two volumes, the rotating and stationary regions, someone could tell me how to do the same with Ansys meshing ?
thanks!Posted November 13, 2013 at 23:11 by samdmas
