CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums

pdp.aero

Register Blogs Members List Search Today's Posts Mark Forums Read

Old

Step-by-step SU2 clean parallel Installation (Part 1/3)

Posted July 27, 2014 at 21:31 by pdp.aero
Updated October 3, 2015 at 02:29 by pdp.aero

Long story short, my system has been infected by a malicious. Couldn't remove it, so decided to format the disk and start over fresh. After, I decided to open a blog and share everything that I did for installing the SU2 suite step by step. What you are going to read is step-by-step instruction for installing the SU2 suite after having a clean OS installation. Therefore, there is no precompiled library, packages or third-party software.

All the instruction provided here is based...
Attached Thumbnails
Click image for larger version

Name:	brokenfanvent.jpg
Views:	183
Size:	91.0 KB
ID:	238  
Member
Posted in Uncategorized
Views 3131 Comments 0 pdp.aero is offline Edit Tags
Old

Step-by-step SU2 clean parallel Installation (Part 3/3)

Posted July 27, 2014 at 21:15 by pdp.aero
Updated October 4, 2015 at 12:28 by pdp.aero (Updating to recent version)

For the past

In this section, we are going to install the SU2 2.0.2, pretty old version comparing to current version 3.2.0, and then SU2 2.0.10, after we will finally install the SU2 3.0.0. Again, download the tar file, put the source in a right place, and unpack it. Before building these versions we will need the stands-alone metis.

Metis 4.0.3

Download the tar file from here, put it in your SU2 2.0.2 trunk, then unpack the tar file and direct there....
Member
Posted in Uncategorized
Views 2085 Comments 0 pdp.aero is offline Edit Tags
Old
Rating: 2 votes, 5.00 average.

Step-by-step SU2 clean parallel Installation (Part 2/3)

Posted July 27, 2014 at 21:12 by pdp.aero
Updated October 3, 2015 at 04:51 by pdp.aero (Updating to recent version 3.2.9)

Step 4: Scipy 0.11.0

First, we need be sure about the f2py, which is a requirement. Enter the below command and make sure you have it. You might find it in /usr/local/bin/f2py.
Code:
whereis f2py
In previous step, we checked that numpy is added to python 2.6.6 site package. Now we can go forward and build scipy. Download the source from here, unpack and follow the below commands in your desired directory.

Code:
sudo python setup.py build
sudo python setup.py
...
Member
Posted in Uncategorized
Views 2255 Comments 3 pdp.aero is offline Edit Tags

All times are GMT -4. The time now is 16:55.