CFD Online Logo CFD Online URL
Home > Forums


Register Blogs Members List Search Today's Posts Mark Forums Read


Trying to include glibc in my build-gcc scripts...

Posted October 24, 2010 at 19:59 by wyldckat
Updated August 27, 2011 at 13:37 by wyldckat (fixed typos...)

If you don't know what I mean by build-gcc, read this first: Automated scripts for building gcc 4.4.x and 4.5.x for using with OpenFOAM 1.7 series

Sometime ago, a problem was detected when using one of my build-gcc scripts (see OpenFoam 1.7.0 on RHEL 4.6 post #3) about no valid being found during the build procedure. This was later fixed by adding the proper lib folder path to LD_LIBRARY_PATH (read post #9 on that thread).

Attached Files
File Type: gz build-gcc44experimental.tar.gz (3.9 KB, 134 views)
Super Moderator
Views 1862 Comments 0 wyldckat is offline Edit Tags

Read this before emailing/PM me

Posted October 4, 2010 at 08:55 by wyldckat
Updated May 31, 2014 at 12:34 by wyldckat

Greetings to all!

This is an open letter to all OpenFOAM users that wish to contact me asking about problems they are having with OpenFOAM.

First of all, please ask in the public forum. There is a good forum thread that explains how to get:

Private messages sent to me should only be used if and only if:
  • You need to provide me sensitive information about a case that should
Super Moderator
Posted in Rantings
Views 3394 Comments 2 wyldckat is offline Edit Tags
Rating: 3 votes, 3.67 average.

Automated scripts for building gcc 4.4.x and 4.5.x for using with OpenFOAM 1.7 series

Posted September 26, 2010 at 10:35 by wyldckat
Updated April 21, 2011 at 21:08 by wyldckat (Added 4th version of the scripts)
Tags gcc, openfoam

This blog post is meant to centralize my efforts for providing gcc build scripts to the OpenFOAM community. It provides build scripts for gcc 4.3.x, 4.4.x and 4.5.x series.

NOTE: If you don't have internet on the computer where you want to run this script, you can still run these scripts, because they will provide you with instructions on which files to download and where to place them!

These scripts are based on the scripts provided with the patches for cross-compiling...
Attached Files
File Type: gz build-gcc.tar.gz (4.6 KB, 242 views)
File Type: gz build-gcc_v2.tar.gz (5.2 KB, 155 views)
File Type: gz build-gcc_v3.tar.gz (5.6 KB, 173 views)
File Type: gz build-gcc_v4.tar.gz (5.7 KB, 359 views)
Super Moderator
Views 5627 Comments 14 wyldckat is offline Edit Tags
Rating: 2 votes, 5.00 average.

Using the official pre-built ParaView 3.8.0 version with OpenFOAM...

Posted July 17, 2010 at 15:19 by wyldckat
Updated September 5, 2011 at 05:17 by wyldckat (Generalized instructions for any version of OpenFOAM; now with sed :D And some more adjustments and instructions)

<-- Related issues to ParaView with OpenFOAM - Fixes and solutions

NOTE - New instructions available here: Using the official pre-built ParaView 3.10.1 version with OpenFOAM
NOTE 2: Instructions for doing a custom build: Building ParaView 3.8.0 with custom Qt 4.6.3

Greetings to all!

[When this post was first written] Less than a month ago OpenFOAM 1.7.0 was released. With it also came ParaView...
Super Moderator
Views 9009 Comments 16 wyldckat is offline Edit Tags
Rating: 7 votes, 5.00 average.

List of threads useful for building OpenFOAM and other Third Party tools

Posted April 8, 2010 at 14:05 by wyldckat
Updated December 8, 2013 at 10:37 by wyldckat (Added a few more links...)

Well, I've been meaning to this for a while now, so here goes - This a list of threads that could prove useful to new comers to OpenFOAM on how to build it as well as the Third Party tools.

Keep in mind:
  • That this isn't going to answer all of the questions you might have, but should help you with the more usual issues you might have.
  • The solution you seek might only come along after reading most of the thread each link points to.

Due to blog post constraint to 10000...
Super Moderator
Views 19254 Comments 2 wyldckat is offline Edit Tags

All times are GMT -4. The time now is 04:39.