 |
 |
 |
|
|
|
[Sponsors] | ||||
May 18, 2012, 07:40
|
STAR-CCM Coupled explicit problem
|
#1 |
|
New Member
Andrew Niven
Join Date: May 2012
Posts: 1
Rep Power: 0  |
I cannot seem to select a turbulence model when I have chosen a coupled, explicit unsteady problem; the choice is only inviscid or laminar. When I choose a turbulence model I can only run the problem implicit unsteady. I do not understand why this is the case. Any help would be greatly appreciated.
I've sorted this now, but can't seem to delete the post!! Last edited by AndyNiven; May 22, 2012 at 11:53. Reason: Problem Solved. |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Using starToFoam | clo | OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... | 33 | September 26, 2012 04:04 |
| Restart Star CCM server? | Apocolapse | STAR-CCM+ | 1 | January 10, 2012 03:56 |
| StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
| error in star ccm | maurizio | CD-adapco | 3 | October 16, 2007 05:17 |
| problem on DPM coupled with CFD | harry | Main CFD Forum | 0 | June 2, 2005 06:12 |
Linear Mode
