CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

surface roughness

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 14, 2012, 18:01
Default surface roughness
  #1
Member
 
adam
Join Date: Oct 2011
Posts: 52
Rep Power: 5
sieginc. is on a distinguished road
If I have an object like this:



It's a model of an inductor, the coils are 18 gage wire. My question is do I need to apply a roughness to this surface, or will STAR recognize the "bumps" along the geometry? I had someone tell me that STAR will consider these surfaces smooth as part of wall treatment but applying a roughness seems unnecessary if the wires are modeled individually as they are. Now, if each coil pack was just a solid cylindrical shape then I could see why a roughness would be needed but I'm not sure.
sieginc. is offline   Reply With Quote

Old   November 2, 2012, 10:42
Default
  #2
Member
 
Reza
Join Date: Mar 2009
Location: Appleton, WI
Posts: 99
Rep Power: 7
triple_r is on a distinguished road
You are absolutely right. If the wires are modelled individually, then there is no need to apply an equivalent roughness. You will need to have a fine enough grid near the wires for the fluid to "see" the bumps though. If your mesh is not fine enough, then probably you are better off with modelling the coils as solid cylindrical objects and specifying an equivalent roughness to that surface.
triple_r is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Problems with coedge curves and surfaces tommymoose ANSYS Meshing & Geometry 0 August 5, 2011 16:02
Decreasing surface roughness in a pipe pat FLUENT 0 June 12, 2006 11:22
CCM+ Surface Roughness AJ CD-adapco 3 March 8, 2006 18:14
Setting a surface roughness on a wall Sandile Peta FLUENT 1 February 3, 2006 07:09
Setting a surface roughness on a wall Sandile Peta FLUENT 3 February 1, 2006 08:14


All times are GMT -4. The time now is 10:47.