CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Meshing of imported 2-D CAD geometry in STAR-CD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 23, 2000, 15:39
Default Meshing of imported 2-D CAD geometry in STAR-CD
  #1
Haris Maharana
Guest
 
Posts: n/a
Hi, I imported one 2-D CAD file of a complicated geometry into STAR-CD. These are in the spline form. I am facing problem in generating meshes using these splines in PROSTAR. Since it is a complicated geometry, generating the mesh using vertices is a cumbersome task. So can anybody help in generating the meshes using splines alone?
  Reply With Quote

Old   June 30, 2000, 13:48
Default Re: Meshing of imported 2-D CAD geometry in STAR-C
  #2
Klaus Debatin
Guest
 
Posts: n/a
Hi Haris,

If you allready have the splines describing your geometry and if they end at the same point (so you do not have gabs) use the block tools. Youst look in the manual, it is an easy task to setup a mesh with blocks surrounded by splines.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Meshing geometry Hengky FLUENT 1 May 3, 2006 17:59
meshing a geometry vinay FLUENT 2 March 3, 2006 07:04
Meshing the geometry Vidya Raja FLUENT 0 February 26, 2006 20:44
Geometry and meshing with CFX Bob Crad CFX 3 January 7, 2004 13:56
MESHING THIS GEOMETRY Parshant Dhand FLUENT 4 March 2, 2003 23:02


All times are GMT -4. The time now is 17:40.