CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

referenece data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 2, 2000, 03:04
Default referenece data
  #1
k.l.huang
Guest
 
Posts: n/a
in Star-cd there are some reference data i am a little confused.

while we input reference date , for example:

reference pressure :1e5 cell number of ref. pressure :1 reference temperence :273 reference density:1.205

does it means ? In cell no.1 pressure = 1e5 temperence = 273 density = 1.205

if not, what's the meaning of ref. density and ref. temperature. Will these two number effect the calculation?

  Reply With Quote

Old   July 3, 2000, 02:01
Default Re: referenece data
  #2
Klaus Debatin
Guest
 
Posts: n/a
With your reference values you set the relative level. When you load your post data you can specify absolute or relative. This relative is related to your reference value. In the inkompressible case where you just calculate dp/dx it is not so important but in the kommpressible case it is important to choose the correct numbers cause you calculate your thermodynamic numbers based on the local values. The boundary conditions you specify are also related to your refference values, so take care what numbers you use and have a closer look to the manual cause there is everytihing written what you have to know about it.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
getting data from case and data files mkrao FLUENT 2 February 10, 2009 01:11
Getting Time Series data from saved unsteady data Atul FLUENT 4 November 26, 2008 06:12
how to save case data and data during iteration? JOHN FLUENT 3 October 10, 2006 19:40
Data-processing of magnitude & phase data diaw Main CFD Forum 12 December 1, 2005 01:39
Where can find airfoil data with pressure distribution or aerodynamic data Ahlo Main CFD Forum 5 January 12, 1999 23:45


All times are GMT -4. The time now is 10:02.