CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

referenece data

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 2, 2000, 03:04
Default referenece data
  #1
k.l.huang
Guest
 
Posts: n/a
in Star-cd there are some reference data i am a little confused.

while we input reference date , for example:

reference pressure :1e5 cell number of ref. pressure :1 reference temperence :273 reference density:1.205

does it means ? In cell no.1 pressure = 1e5 temperence = 273 density = 1.205

if not, what's the meaning of ref. density and ref. temperature. Will these two number effect the calculation?

  Reply With Quote

Old   July 3, 2000, 02:01
Default Re: referenece data
  #2
Klaus Debatin
Guest
 
Posts: n/a
With your reference values you set the relative level. When you load your post data you can specify absolute or relative. This relative is related to your reference value. In the inkompressible case where you just calculate dp/dx it is not so important but in the kommpressible case it is important to choose the correct numbers cause you calculate your thermodynamic numbers based on the local values. The boundary conditions you specify are also related to your refference values, so take care what numbers you use and have a closer look to the manual cause there is everytihing written what you have to know about it.
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
getting data from case and data files mkrao FLUENT 2 February 10, 2009 00:11
Getting Time Series data from saved unsteady data Atul FLUENT 4 November 26, 2008 05:12
how to save case data and data during iteration? JOHN FLUENT 3 October 10, 2006 19:40
Data-processing of magnitude & phase data diaw Main CFD Forum 12 December 1, 2005 00:39
Where can find airfoil data with pressure distribution or aerodynamic data Ahlo Main CFD Forum 5 January 12, 1999 22:45


All times are GMT -4. The time now is 10:02.