CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

How to fix cracks in a tet mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 8, 2000, 22:37
Default How to fix cracks in a tet mesh
  #1
Ron
Guest
 
Posts: n/a
How do you fix cracks in a tet mesh?
  Reply With Quote

Old   August 14, 2000, 20:07
Default Re: How to fix cracks in a tet mesh
  #2
Tara
Guest
 
Posts: n/a
You fix cracks in a tet mesh the same way that you do in any other mesh, by creating couples between the two regions that are disjoined. If you created the entire model at once (you didn't import two regions and are now trying to join them) then I would check to make sure that you don't have double vertices. If you do, merge them using the vmerge command. Else, you can refer to CH 14 of the tutorial manual for instructions on how to create couples.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cracks - importing a Mesh into Star-CD from CCM+ mk_mat CD-adapco 5 December 1, 2007 18:07
Cracks in Mesh SN CD-adapco 2 July 26, 2006 05:30
cracks in ES-ICE mesh escapist CD-adapco 2 July 10, 2005 05:53
Cracks dave CD-adapco 2 November 23, 2004 05:20
Cracks Franch CD-adapco 1 February 14, 2002 09:53


All times are GMT -4. The time now is 11:28.