CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

3-D mesh from 2-D shell

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 18, 2000, 04:39
Default 3-D mesh from 2-D shell
  #1
Hassaneen
Guest
 
Posts: n/a
The default length for the single cell in Z-direction in STAR-CD seems to be very large (13.xx mm). How can we reset that length??. Thanks
  Reply With Quote

Old   August 18, 2000, 08:00
Default Re: 3-D mesh from 2-D shell
  #2
Joern Beilke
Guest
 
Posts: n/a
Who told you this ?

If you have a shell just do a vcextrude where you can specify the delta_z.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CCM+ & ssh shell on IBM Petr Siemens 0 December 5, 2008 04:29
volume or shell for moving/dynamic mesh? naomi FLUENT 1 July 23, 2008 10:04
FSI- shell Federica Main CFD Forum 0 February 28, 2007 19:50
shell and tubes heat exchanger mesh antonio FLUENT 2 January 15, 2006 11:30
Shell Aline Siemens 6 July 7, 2004 03:30


All times are GMT -4. The time now is 09:05.