CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

SAMM users

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 23, 2000, 03:24
Default SAMM users
  #1
Bart Prast
Guest
 
Posts: n/a
We work with ICEM-tetra at my workplace now and I'm not really satisfied with the grids it makes. I like the way SAMM uses hybrid grids as hexa grids are generally better and we only need tetra grids at certain places in our geometry. However before we want to swith I would like to ask users of SAMM whether they are satisfied with the product. We work with STAR-CD (and CFX-5), so the GUI should not be a problem (similar to PROSTAR?). Anybody with bad experiences with SAMM?

regards
  Reply With Quote

Old   August 24, 2000, 04:34
Default Re: SAMM users
  #2
Thomas
Guest
 
Posts: n/a
Dear Bart,

samm is indeed a very powerful and flexible tool. you can choose between trimmed, tet and hexahedral meshing. The major point is the quality of the surface. If you have a tool to generate a 'perfect' triangular surface the tet- and the hybrid approach are the best. The performance (speed of cell generation) is less compared to icem or tgrid but on the other hand you have much more control on your mesh. Last but not least, the sublayer generation (prisms) works much more stable than with any other code I know. Although it sometimes can cause trouble (only sometimes). But there are always ways to solve it, what makes the difference.

pro*am is now avaible for testing. It's prostar and samm joined together in a very user-friendly environment. Try it.

Hope this helps,

Thomas
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX-4.3 to CFX-5.1 Users 2D Claudia CFX 0 November 25, 2002 12:29
CFX Users in NC, USA Ken Dulaney CFX 2 December 3, 2000 13:03
samm vs. ICEM Lars Ola Liavåg CD-adapco 7 October 17, 2000 10:04
SAMM meshing D Redinger CD-adapco 1 January 1, 2000 11:56
Any comment on SAMM? Quazi Main CFD Forum 4 December 2, 1999 18:29


All times are GMT -4. The time now is 13:54.