CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   How to generate grid system with a curved surface (http://www.cfd-online.com/Forums/cd-adapco/52459-how-generate-grid-system-curved-surface.html)

Jing Ren October 5, 2000 12:47

How to generate grid system with a curved surface
 
Hellow! everyone,

Now I am generating a grid system of a nozzle with Star CD 3.10. I defined vertices on the boundary of this nozzle and defined two splines by seclecting the suitable verices for the curved boundary of the nozzle. I hope to generate a grid system with a smooth curved boundary. But now I don't know how to generate cells based my current vertices and splines.

Is there some people experting in this region? Could you show me a right way?

Thanks a lot!


Joern Beilke October 7, 2000 08:12

Re: How to generate grid system with a curved surf
 
Have a look at the following commands:

vgen , vsplfill , vsp(l)gen , c, cgen , vproject , vell and vsmoo


Brian October 20, 2000 04:43

Re: How to generate grid system with a curved surf
 
:)

And, of course, patch.

JIng Ren March 13, 2001 12:58

Re: How to generate grid system with a curved surf
 
Thanks a lot for help!

I have solved the problem by using the grid generation commends in Star CD.

Jing


All times are GMT -4. The time now is 11:12.