CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Limit of CFD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 20, 2000, 15:29
Default Limit of CFD
  #1
mourad Abdelmalek
Guest
 
Posts: n/a
What is the limit of CFD by the Simulation of the flow through a microchannel?
  Reply With Quote

Old   October 22, 2000, 18:35
Default Re: Limit of CFD
  #2
John C. Chien
Guest
 
Posts: n/a
(1). There is no limit on CFD simulation. (2). The possible limit is likely related to the hardware (computer). (3). Whether the cfd results will match the test data, is a different issue. Even the test results are not always accurate. The accuracy issue is related to the correct modelling, solution algorithm, and the mesh used. If you are not using the right physical models, the correct solution algorithm, and the systematic mesh refinement, then you will sure have the accuracy problem. But these are not the limit of CFD. The same problem will happen when the testing is not done properly. (4). But if you need the fine mesh and the hardware can't provide the needed memory, then this is one of the limit on CFD, a hardware related limit.
  Reply With Quote

Old   October 23, 2000, 08:27
Default Re: Limit of CFD
  #3
Bart Prast
Guest
 
Posts: n/a
Ofcourse there is a limit. Most (if not all) CFD codes asume some kind of continuum phase. If you go to very small scales then you approache the Knudsen flow (or free-molecular flow) regime. Here the average pathlength of a molecule between two collisions is of the same order as the geometry (or particle). This is the area of rarified gas dynamics or monte carlo simulations where you have to model the particles (molecules) individually. This is at least one (practical) limit. But in general: If you find a model that describes it, you can solve the equations and get a solution.

But this cannot be very helpfull, I think. Every code has its own limitations.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
limit holdup value mohini CFX 2 July 31, 2008 03:58
How to limit a variable ash OpenFOAM Running, Solving & CFD 1 June 26, 2008 20:32
limit of the CFX Eric CFX 7 December 4, 2006 13:42
How to set solution limit for UDS? Lobby FLUENT 1 June 2, 2006 20:05
TEMPERTURE LIMIT 1.00K MANOJKUMAR FLUENT 0 February 22, 2006 05:35


All times are GMT -4. The time now is 18:45.