CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

could someone tell me how to create a shell

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 26, 2000, 05:36
Default could someone tell me how to create a shell
Posts: n/a
I have made the mesh using Gridgen and read it in the Star-CD.Now I want to create the shells where are set into inlets.Could you tell me how to create the shells and read them into another model?Thanks very much!
  Reply With Quote

Old   October 28, 2000, 19:11
Default Re: could someone tell me how to create a shell
Posts: n/a
Try the following in star-cd:

1.cset,news,fluid $live,surface this will create a shell on the surface of the fluid volume mesh. you can get the shell cell type in the output window after "live surface" is done.Let's say it is ctype 100.

2.cset,news,type,100 $cplot $cset,subs,zone just zoom in and pick up the cells you need for the inlet boundaries.

3.cset,inver 4.cdel,cset 5.cset,all 6.vset,news,cset 7.vset,inver 8.vdel,vset 9.vcom,1,1e9$y 10.ccom$y 11.cwrite,for_inlet.cel,all, 12.vwrite,for_inlet.vrt,all 13.quit,nosave (don't save your .mdl file !!)

Now in the working directroy,you have two files,for_inlet.cel and for_inlet.vrt.Open a new prostar,and resume another model.

1.*get,mxv,mxve (get the max vertex number) 2.*set,voff,mxv + 1 (to be safe) 3.cread,for_inlet.cel,voff (read in cells) 4.vread,for_inlet.vrt,voff (read in vertices)

you have the shells in the new model.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
CCM+ & ssh shell on IBM Petr CD-adapco 0 December 5, 2008 04:29
FSI- shell Federica Main CFD Forum 0 February 28, 2007 19:50
no boundary on shell Ted Crilly CD-adapco 10 March 18, 2005 10:20
Shell Aline CD-adapco 6 July 7, 2004 02:30
3-D mesh from 2-D shell Hassaneen CD-adapco 1 August 18, 2000 07:00

All times are GMT -4. The time now is 03:34.