CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

negative densities

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 26, 2000, 11:06
Default negative densities
  #1
Fabrizio Grieco
Guest
 
Posts: n/a
I have calculated the flow field in a duct using a mesh that had a low number of cells (4000), and I had no problems. But after mesh refining (32000 cells) the calculation stops and gives the following error:

" negative densities found at more than 100 cells"

What kind of problem is it? How can I fix it?

Thanks everybody,

Fabrizio
  Reply With Quote

Old   October 28, 2000, 11:04
Default Re: negative densities
  #2
John C. Chien
Guest
 
Posts: n/a
(1). I think, the person who wrote the code knew that this negative density problem could happen in the code, so he put in a line of code to check the density and also print the message to give the user a warning. As expected, he was right. Now you are having the same negative density problem, and the code works fine because you are getting the printed message of negative density at certain cells. (2). I suspect that if he had a solution to it, he would have removed the printed message already. When he was writing the code, I don't think he knew that you will be doing the same thing later on. (3). I think, he ran into a man hole before, so he decided to put a warning sign there. Now you are in the same man hole, and the sign is still there. (4). So, it is your business to either avoid the man hole, or complain to the city hall.
  Reply With Quote

Old   October 28, 2000, 18:34
Default Re: negative densities
  #3
CCY
Guest
 
Posts: n/a
Redefine your inlet and outlet boundaries and pressure reference cell number after the refinement.
  Reply With Quote

Old   October 29, 2000, 04:42
Default Re: negative densities
  #4
A.Hassaneen
Guest
 
Posts: n/a
Fabrizio, look at the file (case.info) and see what went wrong in the solution to have (-ve) pressure or temperature causing these (-ve) densities, then come back to the forum and discuss your findings. Don't worry, it's not a big deal.
  Reply With Quote

Old   October 30, 2000, 02:47
Default Re: negative densities
  #5
Lennart Wern
Guest
 
Posts: n/a
I have had the same problem! It seems to depend on the mesh quality. I suggest that you look for bad cells and try to fix them.

It is much more important to have a good mesh when you solve for the temperature.

Regards,

Lennart Wern

Swedish Meteorological and Hydrological Institue
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
negative densities john CD-adapco 0 March 19, 2008 07:32
negative densities Riyaz Ahamed CD-adapco 2 August 14, 2007 01:47
Negative Densities Chris CD-adapco 4 June 25, 2007 08:39
negative densities CMB CD-adapco 4 January 4, 2004 03:41
negative densities. Mihir CD-adapco 4 December 9, 2002 22:04


All times are GMT -4. The time now is 20:40.