CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Wall Force

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 16, 2001, 09:40
Default Wall Force
  #1
Matteo
Guest
 
Posts: n/a
I explain my problem : I have to calculate the force over a moving surface (Region 15). I used POSDAT subroutine with this loop :

REG=15; FX=0.0; DO IB=1,NBMAXU IF(IRN(IB).EQ.REG) THEN FX=FX+FORCB(1,IB); ENDIF; ENDDO;

It performed me a result which is different from the monitoring data contained into casename.erd file, where I imposed to print the x-force over the surface at each iteration.

Is there anyone who can tell me why ?

Thanx, Matteo
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wall shear force with VOF Jürgen FLUENT 0 July 27, 2007 07:28
Pressure/Force on Wall BCP Gabor CFX 2 December 5, 2005 11:06
Wall Force&entropy N12 Siemens 2 March 4, 2005 10:29
Wall Force Export Matt FLUENT 0 July 23, 2002 20:51
Wall Shear Force Bo B. B. Jensen Main CFD Forum 3 January 28, 2000 18:48


All times are GMT -4. The time now is 06:24.