CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Beginner question mesh generation.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 22, 2001, 06:48
Default Beginner question mesh generation.
  #1
Oleg Melnik
Guest
 
Posts: n/a
Dear StarCD users,

I an a beginner user of this package. I try to calculate flow in a simple axially symmetric domain z=[0,h], r=[0,R] originating from a supersonic jet inflow from the region r=[0,r1]. The boundaries are: z=h, r=R outlet, z=0, r=[r1,R] wall. The problem is 2D.

The question is how to generate a mesh. I would like to have gradual increase in mesh size from r,z=0,0 in both direction for example as a geometric progression. What commands should I use to do it? Shell I generate a 2D mesh and make 3D from it by assuming symmetry conditions (what mesh type should I use then fluid, shell or other) or I should generate a 3D sector?

Best regards, Oleg Melnik
  Reply With Quote

Old   February 24, 2001, 11:00
Default Re: Beginner question mesh generation.
  #2
Antje
Guest
 
Posts: n/a
Hi!

It is not very easy to explain how to generate a mesh.

Tipp: lock at the help-manuell, read and try the tutorials. You can use the Star-Guide to lean the Commands who are write to the commando window. In the help manual is a List of Commands. Wenn you Know which Command can be usefull: type help >Command> read.

Antje
  Reply With Quote

Old   February 26, 2001, 03:39
Default Re: Beginner question mesh generation.
  #3
Oleg Melnik
Guest
 
Posts: n/a
Thanks Antje,

I've got macros that will generate the mesh.

Oleg
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
question from ICEM beginner Jiuan CFX 1 March 6, 2009 19:41
URGENT: HELP ICEM beginner mesh generation car guest7777 CFX 13 October 15, 2007 05:25
LES beginner question Shuo Main CFD Forum 4 July 9, 2007 08:40
Question from a beginner Arun K Main CFD Forum 4 August 13, 2004 07:17
QUESTION IN GENERATION OF BODY-FITTED MESH James Zhu Main CFD Forum 0 September 19, 2000 04:06


All times are GMT -4. The time now is 01:56.