CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

crack message for building grid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 22, 2001, 16:34
Default crack message for building grid
  #1
Sangwon Kim
Guest
 
Posts: n/a
I tryed to build the grid in spherical coordiate.

The conditions that I put in the box was like this.

R 0 10 10 theta 0 180 10 phi 0 90 10

If then, there is surface crack messages for the checking grid.

Error number is #75. Do you have any ideas for this message and using the spherical coordinate in prostar?

Sangwon
  Reply With Quote

Old   February 23, 2001, 09:40
Default Re: crack message for building grid
  #2
Chinor
Guest
 
Posts: n/a
I tried what you did, and yes you wind up with some vertices which are not mergred. So, this means that the grid which was generated is not completely connected. Therefore, you get the crack error(s).

To fix it, do the following:

When you check the grid for cracks, use the "new set" option and put the cells which violate the crack checker in a set.

Then issue the following: vset news cset cset add vset any cset subs fluid vset news cset vmerge vset

This will merge the unconnected vertices and subsequently fix the cracks.

Check the grid again, and the cracks are gone.

Have Fun.

Chinor
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error during grid building (parallel version) Ale FLUENT 3 July 23, 2010 15:35
found crack in prostar but no crack in CCM+ ?? Ingear CD-adapco 4 October 23, 2006 09:37
Error message when importing the grid Winnie FLUENT 1 March 10, 2005 05:55
Cannot display grid and getting error message tom FLUENT 3 July 14, 2004 18:26
Problem on building grid operation (fluent) remy FLUENT 0 April 12, 2002 10:37


All times are GMT -4. The time now is 02:09.