CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

Impingging jets using StarCD

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 29, 2001, 02:02
Default Impingging jets using StarCD
Posts: n/a
I am trying to simulate a 2D impinging jet on a flat plate using StarCD. I am having problems with the Boundary conditions. I have a symmetry boundary condition on the left side(west) of the 2D domain. The bottom boundary (south) is wall(no-slip) and is fine too. The top boundary(north) is divided into 2 parts, I(north) and B1(north). I have D/2 as inlet boundary condition at I(north)where I specify the downward jet velocity, on the top left, adjoining the symmetry boundary,and that is ok too. I am having problems with the boundary conditions at B1(north) and B2(right). I have used pressure for both B1 and B2 and the results are not good. I have used wall for B1 and outlet for B2 and then also it does not give good results. By not getting good results, I mean that my U (radial velocity) velocity is increasing with radial distance away from the symmetry line, instead of decreasing. Due to the effect of the bottom wall, I expect that the velocity should decrease as we go further away and that is reported in literature too.

Please let me know what boundary condition might be a realistic simulation of the Boundary conditions at B1 and B2. In Reality they are both open surfaces. Or do let me know your suggestions.



  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Jets shuo OpenFOAM Paraview & paraFoam 0 April 6, 2006 01:05
Suction Jets - StarCD M Patel CD-adapco 1 October 4, 2004 07:37
LES of Jets rajani FLUENT 0 February 22, 2004 00:36
Convert from StarCD 3.10 to StarCD 3.15 Jing CD-adapco 1 April 17, 2002 09:22
jets mechikel mohamed Main CFD Forum 7 April 12, 2001 02:15

All times are GMT -4. The time now is 16:44.