CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Star-HPC

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 26, 2001, 09:44
Default Star-HPC
  #1
Michael
Guest
 
Posts: n/a
Is it possible to run 4 threads on 2 dual PC? What shell i do? thanks a lot. Michael
  Reply With Quote

Old   September 26, 2001, 18:38
Default Re: Star-HPC
  #2
Peter
Guest
 
Posts: n/a
this depends on the platform. as far as i know hpc is not available under nt, but under linux there should be no problem.

you have to setup a hpc run with (the gui) prohpc for distributed memory - select 4 cpu's - this means that each pc(-name) should be in the host list two times. then go through the panels following the manual or online help.

p.s.: before you can do this you have to install hpc and get licenses for it from cd
  Reply With Quote

Old   September 27, 2001, 03:48
Default Re: Star-HPC
  #3
Philip Jones
Guest
 
Posts: n/a
Hi

Peter is right in what he says, HPC is available for all Unix platforms but not yet PC. I am doing the PC port for HPC at this very moment (got the first benchmarks completed yesterday and the speed-up: 60% on 2 dual vs single, is worth having). If anyone out there is willing to act as a tester I would be happy to work with them, my experience with PCs is that two supposedly similar machines behave differently depending upon what other software has been installed and so I want to try as many platforms as possible especially those I have not set up and which are not out of the box.

The version we are porting is v3150 which is the latest version of STAR-CD. Testers would need to be existing STAR-CD users.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to export a mesh from star design to star cd aounallah CD-adapco 4 March 6, 2009 07:22
Star Design to Star-CD(Prostar) AB CD-adapco 5 October 28, 2004 12:21


All times are GMT -4. The time now is 22:47.