CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   Moving Jet Simulation (https://www.cfd-online.com/Forums/siemens/52717-moving-jet-simulation.html)

psen November 3, 2001 03:43

Moving Jet Simulation
 
Can I model a circular moving jet using STARCD ? The jet is at a certain distance above the ground and coming out at a constant velocity from a circular shaped nozzle and impinging on the ground. I would like to see the effect on ground impingement of the jet due to the horizontal translation of the jet at certain velocity .

Thanks

psen

Nader November 4, 2001 05:47

Re: Moving Jet Simulation
 
Psen:

This is possible: introduce the jet as a boundary condition on a cylinder above your domain, and use the arbitrary sliding interface to allow the cylinder to translate. I did one recently - if you have problems, send me a mail, and I can send you the setup.

Nader

psen November 4, 2001 21:23

Re: Moving Jet Simulation
 
hi Nader,

Thanks a lot. Would it be possible for you to send me the setup ? If so, you can email it to me at anindya@iastate.edu .

Sincerely

Anindya



All times are GMT -4. The time now is 17:13.