CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Moving Jet Simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 3, 2001, 03:43
Default Moving Jet Simulation
  #1
psen
Guest
 
Posts: n/a
Can I model a circular moving jet using STARCD ? The jet is at a certain distance above the ground and coming out at a constant velocity from a circular shaped nozzle and impinging on the ground. I would like to see the effect on ground impingement of the jet due to the horizontal translation of the jet at certain velocity .

Thanks

psen
  Reply With Quote

Old   November 4, 2001, 05:47
Default Re: Moving Jet Simulation
  #2
Nader
Guest
 
Posts: n/a
Psen:

This is possible: introduce the jet as a boundary condition on a cylinder above your domain, and use the arbitrary sliding interface to allow the cylinder to translate. I did one recently - if you have problems, send me a mail, and I can send you the setup.

Nader
  Reply With Quote

Old   November 4, 2001, 21:23
Default Re: Moving Jet Simulation
  #3
psen
Guest
 
Posts: n/a
hi Nader,

Thanks a lot. Would it be possible for you to send me the setup ? If so, you can email it to me at anindya@iastate.edu .

Sincerely

Anindya

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
HELP - Moving car simulation in fluent Brad Wells FLUENT 6 February 27, 2012 03:14
Airfoil simulation using moving wall Alejandro NUMECA 9 November 4, 2008 03:00
Moving Reference frame - UDF - Moving mesh modisa FLUENT 0 April 18, 2008 13:31
VOF simulation, drop is moving inspite of no-slip! Srinivas FLUENT 0 March 24, 2007 13:21
Simulation of flow between two moving plats atnano sachin FLUENT 0 August 27, 2006 23:51


All times are GMT -4. The time now is 11:11.