CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

Generating a Non-Uniform 2-D Axisymmetric Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 13, 2001, 02:52
Default Generating a Non-Uniform 2-D Axisymmetric Mesh
Posts: n/a
I am simulating an Impinging Jet. I am using 2D Axisymmetric grid (cylindrical coordinate system with one cell only in theta direction). How can I generate the mesh which has a boundary layer meshing near the impingement wall and also at other locations.


  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
error in generating mesh in pro-am Julian CD-adapco 3 December 21, 2007 01:29
Difficulty in generating 3-D mesh Rucy FLUENT 3 November 10, 2005 10:53
Generating mesh Jonathan CFX 2 February 13, 2004 01:27
Generating Mesh (CFX) Steven CFX 1 February 25, 2003 12:53
Generating Mesh Steven CFX 0 February 25, 2003 12:31

All times are GMT -4. The time now is 21:00.