CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Temperature below ambient value?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 7, 2002, 21:22
Default Temperature below ambient value?
  #1
raymond
Guest
 
Posts: n/a
Now I'm running the transit case of heat generated airflow with the boundary conditions set to pressure boundary. I have defined my grid system and time step very carefully to control courant number below 10 and number of PISO correction below 5. The result is quite good except at a location of round corner, where the temperature below amibient temperature, sometimes lower even much. What's the problem with it? Is the grid size not fine enough at that location? I have tried the same case of same grid size with CFX and CFD software developed by myself, all are perfect. It there some other reason ? BTW, I set the air gas as ideal gases = f(T). The temperature of it could be more than 800 degree.

Thanks in advance!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
heated palced in ambient. NVSD BABU CFX 1 February 26, 2009 09:52
KIVA ambient pressure Sasidhar Main CFD Forum 0 August 4, 2006 17:02
suction from ambient soren Main CFD Forum 0 July 1, 2005 18:45
ambient sun radiation co2 FLUENT 0 January 29, 2004 12:31
some queations on stratified ambient pangpang Phoenics 0 December 20, 2001 03:01


All times are GMT -4. The time now is 22:13.