CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Inflow/outflow problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 27, 2002, 06:50
Default Inflow/outflow problem
  #1
Julie Polyakh
Guest
 
Posts: n/a
I obtain an outflow of scalars at the inlet where these scalars aren't defined at all. What is the problem and how to solve it?

P.S. I think that all the troubles (there is a recirculation also) are because of the pressure boundary, but I can't not to use it.

Thanks, Julie
  Reply With Quote

Old   January 27, 2002, 10:30
Default Re: Inflow/outflow problem
  #2
ccy
Guest
 
Posts: n/a
Hi Julie: If this happens in the first few iterations, you can ignore it. If this still happens after a few hundred iterations, You can 1. turn the mean option on in the pressure BC. This will eliminate the pressure difference on the pressure BC plane. 2. check the location and value of the refrenece pressure. 3. move the location of the pressure boundary upstream. sometimes, it makes sense recirculation exists if you have a very strong adverse pressure gradient.

If you could post your problem in more detail, that will be very helpful to figure out the problem.

regards, ccy
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inflow-Outflow Rajesh FLOW-3D 2 December 2, 2008 09:10
Inflow-Outflow Rajesh Main CFD Forum 16 November 24, 2008 12:16
Outflow/Inflow Conditions Tushar Main CFD Forum 0 February 17, 2008 05:59
Inflow without outflow! ANASTASIOS GEORGOULAS FLUENT 3 September 15, 2007 03:58
inflow-outflow conditions Chris Valade Main CFD Forum 0 March 7, 2004 18:09


All times are GMT -4. The time now is 02:21.