CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   how to calculate the flow rate through a surface (http://www.cfd-online.com/Forums/cd-adapco/52825-how-calculate-flow-rate-through-surface.html)

july February 14, 2002 08:17

how to calculate the flow rate through a surface
 
hi... Anybody knows how calculate the flow rate through a surface... is there any facilty in Star cd to do that?

Stephan Meyer February 14, 2002 08:29

Re: how to calculate the flow rate through a surfa
 
Use the *get command with option tas or tav (type "help *get" in prostar command line for detailed information).

Daniel February 15, 2002 05:34

Re: how to calculate the flow rate through a surfa
 
Another option is to load the flux results via the GETCELL, FLUXSUM command, initialize the flowrate via FLUXSUM, INIT and the pick the faces through which you need the flux calculated via FLUXSUM, CROSS or FLUXSUM, ZONE. The result appears in the output window.

july February 15, 2002 07:06

Re: how to calculate the flow rate through a surfa
 
thank you Daniel...


All times are GMT -4. The time now is 21:14.