CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Roughness of a duct

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 25, 2002, 09:52
Default Roughness of a duct
  #1
Franch
Guest
 
Posts: n/a
I have to compare two models: one made with StarCD, one made with AMESim.

In AMESim I can define for my duct the friction coefficient.

In StarCD I have roughness in wall boundary (parameter Elog or similar) and in the Turbulence model (I use k-epsilon with high Reynolds number).

How can I match them together? How can I evaluate StarCD parameters from a friction coefficient that I know?
  Reply With Quote

Old   February 25, 2002, 11:49
Default Re: Roughness of a duct
  #2
Helge
Guest
 
Posts: n/a
1) AMESim is a 1D tool which you have to supply with empirical correlations for friction, heat transfer and so on 2) STAR-CD is a 3D tool with which one hopes to get rid of empirical correlations 3) So what you may compare are results of AMESim and STAR-CD with measurements or 4) results of AMESim and STAR-CD with approved empirical correlations (which of course you had implemented in AMESim beforehand)
  Reply With Quote

Old   April 12, 2002, 08:04
Default Re: Roughness of a duct
  #3
july
Guest
 
Posts: n/a
If you have to define a friction factor to model your roughness, you can try to use the porous media facility provided from star Cd... You can found more suggestion in your alfa and beta choose in the methodology guide Example of calculation (take a look to the 2nd example)(distribuited resistence).
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help (Roughness) George Phoenics 2 May 18, 2010 10:48
Roughness Meri CFX 1 June 7, 2005 18:28
roughness azmir CFX 4 April 21, 2005 00:16
Roughness TJ Phoenics 3 September 13, 2004 03:11
roughness? Masaru Phoenics 1 July 17, 2003 10:29


All times are GMT -4. The time now is 12:18.