CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Pro am and Csys

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 1, 2002, 11:13
Default Pro am and Csys
  #1
joel
Guest
 
Posts: n/a
Is it possible to generate a mesh in pro am with different coord systems in differnt regions? For example i am trying to mesh a large cylindrical domain with an internal feature in the centre which i wish to spin. I want the mesh around the feature to be trimmed cell in a cateasian sys and then a cylindrical to the edge of the domain, this is so i can have a plane in between that can slide. Any Ideas?? Cheers
  Reply With Quote

Old   March 1, 2002, 19:08
Default Re: Pro am and Csys
  #2
paul
Guest
 
Posts: n/a
Use a custom mesh.
  Reply With Quote

Old   March 2, 2002, 12:36
Default Re: Pro am and Csys
  #3
ccy
Guest
 
Posts: n/a
You can break up the surface into two seperate closed surfaces. Create subsurface on the surface that contains the internal feature. Generate two extrusion layers, and modify them to different cell types. One is spinning and the other is stationary.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 05:43.