CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

MIXASI

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 17, 2002, 08:34
Default MIXASI
  #1
Lorenzo
Guest
 
Posts: n/a
Someone can help me in setting MIXASI feature? I have those errors...

**ERROR - THE CURRENT EVENT DOES NOT HAVE ANY

DESCRIPTIONS TO BE SAVED. TIME OF OCCURRENCE = 0.00000000 ACTUAL EVENT NUMBER 2 DEFINED AT TIME 0.00000000 PROCEED TO DEFINE OCCURRENCES **WARNING - SLIDING EVENT 1 NOT SAVED IN EVENTS DATA FILE 8 **WARNING - SLIDING EVENT 1 NOT SAVED IN EVENTS DATA FILE 8 SLIDING EVENT 1 ENABLED IN CURRENT EVENT NUMBER 2

Thank you
  Reply With Quote

Old   April 17, 2002, 14:37
Default Re: MIXASI
  #2
Achim
Guest
 
Posts: n/a
is it still your radial fan ? tutorial 7.3 might help. but is MIXASI really useful in your case ? i posted some hints to your previous question.

regards
  Reply With Quote

Old   April 17, 2002, 15:55
Default Re: MIXASI
  #3
LORENZO
Guest
 
Posts: n/a
It's ALWAYS my radial fan, because I tried with lower values of rpm, but the convergence (expecially for mass) is poor...I must wait convergence for all runs? You don't think transient approach will give better results? Thank you,Lorenzo
  Reply With Quote

Old   April 18, 2002, 14:35
Default Re: MIXASI
  #4
Achim
Guest
 
Posts: n/a
No as I said you don't need a converged solution for all rpms, but a stable one. when using standard relaxations about 20-50 iterations per rpm should do.

I use transient runs only if i am looking for transient effects. when investigating the blade design it seems to be more useful model the blade with cyclic boundaries and a dense mesh. when looking at the whole impeller you will have to use coarser grids.

For transient runs i don't use MIXASI because of the restrictions to the mesh at the interface. instead I use arbitrary sliding interfaces with an initial solution from steady explicit mrf (don't use this for steady-only runs).

so I always start with steady runs.

  Reply With Quote

Old   April 19, 2002, 03:48
Default Re: MIXASI
  #5
bosko
Guest
 
Posts: n/a
What restrictions on the mesh at the interface?

B.
  Reply With Quote

Old   April 19, 2002, 07:29
Default Re: MIXASI
  #6
Lorenzo
Guest
 
Posts: n/a
I think 1:1 correspondance....
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The question about mixasi KtoTo CD-adapco 0 March 20, 2007 06:35


All times are GMT -4. The time now is 04:51.