CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

flow towards and from dead-end

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 23, 2002, 07:23
Default flow towards and from dead-end
  #1
Bo Jensen
Guest
 
Posts: n/a
Hallo

I have made two simulations on the same geometry. The geometry is a T piece with one end of the top bar closed one diameter from the intersection. I have modeled flow so it enters either one way or the other through the T piece. I get the highst relative pressure in the dead-end in the case where flow is away from the T piece and not as I would expect when flow is towards the dead-end. Could andone give an reasonable explantion of this. (by relative pressure I mean the pressure seen in relation to the mean pressure on the outlet surface.

Regards

Bo
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is powerflow dead or still alive ? john Main CFD Forum 12 August 12, 2013 11:35
EXA dead ? CFD_user Main CFD Forum 2 February 1, 2005 23:56
Dead Leg zahid FLUENT 0 September 15, 2003 07:03
Why does the Fluent seem to be dead ... Knick FLUENT 5 January 22, 2003 20:42
Is CFD a dead end? Sebastien Perron Main CFD Forum 17 March 25, 2001 21:00


All times are GMT -4. The time now is 15:59.