CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

multicomponent mixing...

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 14, 2002, 09:35
Default multicomponent mixing...
  #1
july
Guest
 
Posts: n/a
Hi... my problem involve multicomponent mixing... i've two species H2, Air, they flows in separeted channel but they comunicate by a porous media... i've obtained a solution but there are many warnings in the file.inf

iteration number 1 1)warning 042 2)warning 044 3)warning 009 (the value of scalar sc2 in cell ...is below the minimum.... any advise for this kind of problem...?
  Reply With Quote

Old   May 16, 2002, 23:20
Default Re: multicomponent mixing...
  #2
raymond
Guest
 
Posts: n/a
It only display in iteration 1, for your initial condition of calculated component is too lower. It's nothing important.
  Reply With Quote

Old   May 19, 2002, 22:38
Default Re: multicomponent mixing...
  #3
John
Guest
 
Posts: n/a
Scalar transports by convection and diffusion. Either steady state or transient, convection effect only goes several cell layers in each iteration or time step depending on velocity. But diffusion equation is implicit, and any disturbance should spread out instantly to the whole field. If it is far away from source, the concentration should be nearly zero, and thus give a below the minimum value. In steady state SIMPLE algorithm, this should disappear after some iterations; otherwise, check mesh quality. And similarily, in transient process.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multicomponent mixing Sam CD-adapco 0 February 9, 2006 12:37
How to do this multicomponent flow in cfx? John CFX 0 February 4, 2006 11:19
Multicomponent fluid Andrea CFX 2 October 11, 2004 05:12
Multicomponent Carola CFX 1 September 2, 2003 16:03
ideal gas mixing law and mass-weighted mixing law Shankar FLUENT 0 June 24, 2003 13:25


All times are GMT -4. The time now is 07:00.