CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Viscosity and equation status (http://www.cfd-online.com/Forums/cd-adapco/52934-viscosity-equation-status.html)

Mir June 11, 2002 05:59

Viscosity and equation status
 
I have a turbolent flow with standard air, in Solution Control>Equation Behaviour>Primary variables Equation Status can I swhitch Viscosity in the fluid properties? If I don't swhitch it I have a solution, oterwise it's totally different. I defined constant viscosity , then where is the difference?

john YL June 11, 2002 13:42

Re: Viscosity and equation status
 
If it's turbulent flow, then if you choose Thermophysics Models>Turbulence Models> select ON (choose a model) for example K-E/High Reynolds Number, then in your selected panel, the viscosity should be on automatically. If you switch off viscosity, you are running laminar flow.

Anton Lyaskin June 13, 2002 08:24

Re: Viscosity and equation status
 
All this happens because viscosity consists of two parts - molecular viscosity, wich is set constant in your case and so called "turbulent viscosity" wich is calculated from turbulence parameters (k and epsilon). Turning on viscosity in primary variables tells the code to calculate and account for turbulent viscosity.

Mir June 13, 2002 13:39

Re: Viscosity and equation status
 
Thanks. I solved this problem reading the Userguide, Commands and Methodology Manuals.


All times are GMT -4. The time now is 23:09.