CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Adding cells during mesh motion (http://www.cfd-online.com/Forums/cd-adapco/53104-adding-cells-during-mesh-motion.html)

Serkan Cetin December 4, 2002 02:31

Adding cells during mesh motion
 
I try to simulate a flow in a cylinder gap of 0.2 mm with a piston jump stroke of up to 30 mm.

Has anybody experiences in succeeding in this kind of example with Star-CD, especially by adding/removing cells during mesh motion?

Thanks & regards

Jane December 23, 2002 04:22

Re: Adding cells during mesh motion
 
I had simulated a flow in a cylinder gap of 0mm with a piston jump stroke of up to 2mm,but without using adding/removing cells during mesh motion.What difficults did you face in doing it?Perhapes I can help you.


All times are GMT -4. The time now is 16:24.