CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

How to fix a node on intermediate spline's vertex

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 10, 2002, 05:02
Default How to fix a node on intermediate spline's vertex
  #1
Fuligno Luca
Guest
 
Posts: n/a
Someone knows if it's possible to fix a node on a intermediate vertex of a spline? In this way I can create, for example, 2 different blocks connected with only 1 contiguous block with matching meshes without using "cpmatch" (I've a very big and complex mesh, and cpmach seems to be very slow). I've tried with "blktrace", but this command seems to modify separately each one block of the selected blockset, so I've to produce on the biggest block a mesh fitted on the coarsest mesh of the small lateral blocks. Thank you! Luca
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Getting intermediate values for pUT etc srinath OpenFOAM Running, Solving & CFD 2 July 7, 2008 22:13
how can i list node temperatur by node location Ali Doustdar FLUENT 2 July 12, 2007 23:48
turbulent quantity goes -ve for intermediate run Sourabh Main CFD Forum 0 November 29, 2006 00:37
Intermediate Restart Files RK CFX 0 September 6, 2005 09:32
CFX 5.5.1 and writing intermediate results Andrej CFX 1 January 18, 2003 22:00


All times are GMT -4. The time now is 23:33.