CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

to do a run in parallel mode with star_hpc

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 23, 2003, 10:59
Default to do a run in parallel mode with star_hpc
  #1
massimo
Guest
 
Posts: n/a
Hello, I'm trying to do a run in parallel mode with star_hpc but I have found a problem with view factors. The error say:

"beam tracking is not supported in parallel - exiting", for 4 time, in fact I have decomposed the geometry file for 4 processors.

The file .vfs must be created as a serial run after that I have put it on the directory that star_hpc has created.

Have you any idea?

Thank you in advance.
  Reply With Quote

Old   January 23, 2003, 14:46
Default Re: to do a run in parallel mode with star_hpc
  #2
Dino
Guest
 
Posts: n/a
Are you using participating or non-participating media? Participating media is not supported in parallel.
  Reply With Quote

Old   January 24, 2003, 05:06
Default Re: to do a run in parallel mode with star_hpc
  #3
massimo
Guest
 
Posts: n/a
Hi Dino, I'm using non-participating in thermal options. What can I do? Thank you in advance. Bye
  Reply With Quote

Old   January 25, 2003, 13:49
Default Re: to do a run in parallel mode with star_hpc
  #4
steve
Guest
 
Posts: n/a
You need to run 1 iteration in serial in order to computer the radiation view factors. After they are computed, you should be able to continue the run in parallel.
  Reply With Quote

Old   January 30, 2003, 09:33
Default Re: to do a run in parallel mode with star_hpc
  #5
marco
Guest
 
Posts: n/a
Look at ma answer of Mo. 27. to your previous Question !
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A UDF Problem in Parallel Mode Jun FLUENT 1 October 26, 2011 13:49
DPM model in parallel batch mode Prashanth FLUENT 2 March 6, 2009 08:54
moving mesh in parallel mode Karteek Siemens 4 June 16, 2008 05:12
parallel mode - small problem? co2 FLUENT 2 June 2, 2004 00:47
How to run his phoenics in parallel mode? Bryan Lam Phoenics 3 December 19, 2001 10:43


All times are GMT -4. The time now is 16:26.